Infineon IFX007T BLDC Shield + XMC4700 Relax Kit + Nanotec BLDC Motor RoadTest

Hi,

Here is a #RoadTest blog on Infineon IFX007T BLDC Shield + XMC4700 Relax Kit + Nanotec BLDC Motor having insights on product, getting started, hardware/software tools and building systems.












Overall this is a great product by review and has wide applications in control and automation sector. I would highly recommend this range of Infineon products for new designs and applications.

Thanks to Infineon Technologies and element14 Electronics for sending the hardware and giving this opportunity to RoadTest. The blog is @ https://www.element14.com/community/roadTestReviews/3486/l/infineon-bldc-shield-xmc-4700-relax-kit-motor-review

Product Pages

IFX007T BLDC Shield: https://www.infineon.com/cms/en/product/evaluation-boards/bldc-shield_ifx007t/

XMC4700 Relax Kit: https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc47_relax_5v_ad_v1/

Nanotec BLDC Motor: https://en.nanotec.com/products/1787-df45l024048-a2-brushless-dc-motor-with-connecting-wires


#EE #powerelectronics #roadtest #bldcmotor #mechanicaldesign #ifx007t #xmc4700 #nanotec #infineon #element14 #thankyou

Comments

Post a Comment

Popular posts from this blog

MicroPython #3: PWM, LED Fade

Image
MicroPython Pulse Width Modulation & Duty Cycles At the end of this, you will be able to implement PWM technique and see it on inbuilt LED in Pin2 of ESP 8266 and also by attaching external LED's. The whole process will be done by MicroPython programming. So, Let's begin with !  Note:  You must have your MicroPython firmware pre-flashed onto your board before beginning with this. If not, follow up these  before getting back here. MicroPython #1: Introduction and Gearing U p MicroPython #2: Triggering I/O's Introduction to PWM & its concepts Pulse Width Modulation(PWM) is a technique for getting analog results with digital means. Digital control is used to create a square wave, a signal switched between on and off. This on-off pattern can simulate voltages in between full-on (5 Volts) and off (0 Volts) by changing the portion of the time the signal spends on versus the time that the signal spends off.  The duration of "on tim...
Read more

MicroPython #2: Triggering I/O's

Image
MicroPython Triggering Input / Output Ports   At the end of this, you will be able to trigger High and Low voltages to your I/O ports and see it on inbuilt LED in Pin2 of ESP 8266 and also by attaching external LED's. The whole process will be done by MicroPython programming. So, Let's begin with !  Note : You must have your MicroPython firmware pre-flashed onto your board before begining with this. If not, follow up MicroPython #1: Introduction and Gearing Up   before getting back here. >>  Initial IDE Setup  >> Connect the board to your computer via USB cable (Check if it has data transfer too) Here, I am using ESP 8266 NodeMCU - V.3 board to run MicroPython. >> Open your Thonny IDE and do initial setup as follows: >> Go to Tools >> Options in the top window.  The above dialog box appears and in Interpreter window, select MicroPython (Generic) language for intrepreting. ...
Read more